November 29, 2021

Wet Cleaning: Useful Tips

Wet cleaning is the most effective cleaning type if you want to maintain a clean apartment. This is the simplest way to remove most of the dirt that regularly appears in your home. But you need to know some techniques that help your cleaning to give the best result and avoid cleaning mistakes.

Preparing for Cleaning

Proper preparation is the key to success! The time spent on cleaning depends on how the preparatory work will be carried out. After all, complete awareness in the choice of means and a certain algorithm allows you not to spray attention, but at the same time to process all surfaces.

The sequence of preparation:

Make a list of all rooms.
Write all surfaces requiring wet cleaning, in front of each room in your list
Make a list of cleaning agents and accessories to be used.
When all the lists are ready, you need to collect cleaning supplies, wipes, and mops near the back room. But before proceeding with wet cleaning, it is necessary to dry clean the surfaces. All shelves, tables, and chairs should be cleaned with a special brush or microfiber cloth.

Clean the dust from:

top of the cabinets;
bookshelves;
chandeliers, sconces, floor lamps shades;
picture frames and picture lights;
wooden headboards;
solid armrests;
doors and window frames;
office equipment;
decorative interior items.

Moreover, if there are many uneven surfaces, a large number of shades of a chandelier, or statuettes on the shelves, then you should prepare a special brush with a long bristle. But when the shelves are free, it is better to choose a cloth napkin.

It is also important to remember that if there is hidden or veiled ceiling lighting, then it must also be cleaned of dust every time.

Cleaning Sequence

An important component of high-quality apartment cleaning in NYC is the correct cleaning sequence. After all, if you break the order, some of the already removed dirt will spread back. Therefore, you should start with the room that is located farthest from the entrance and bathroom. If it has a balcony, then first they carry out wet cleaning on it.

Follow the cleaning sequence!

It is required to move so that the cleaning of the premises ends at the door. Therefore, this is where all cleaning products and devices are left. It is important to immediately remove inventory so as not to move around on a clean floor. When finished with the first room, close the door and move on to the next room. Do the same in each room after it was cleaned, until all rooms would be cleaned.

After the living rooms are cleaned, sanitize and clean the kitchen, and then clean the living room. The ultimate room to clean is the corridor. It is important to start at a corner away from the front door. Cleaning the passageway should be completed at the entrance, this must be done so that street dirt does not spread throughout the room.

When the office is clean, start cleaning the bathroom and toilet. First, clean all surfaces in the shower room and closet, then clean all the filters with the reservoirs of the washing vacuum cleaner. Next, clean mixers, a shower cabin, and a bathtub, a toilet. Only then the cleaning of the premises is considered as finished.

If the owners prefer a regular vacuum cleaner to a washing one, then the last place that is cleaned in the apartment will be the area where the dust collector is removed.

Wet Cleaning

When all dust has been removed, start polishing mirrors and windows with a special glass detergent. You should also wipe down all glass surfaces that are near places where people usually are. These can be shower glass doors, shelves under glass, and windows for ventilation, especially near the handle. This should be done with every cleaning to prevent the accumulation of fingerprints on glass surfaces.

After that, wipe the balcony and window handles with a damp cloth. Next, clean the cabinet doors; these are the most frequently used home furnishings, so they need to be cleaned during every cleaning.

Next, wipe the tables with a damp cloth. This should only be done after removing dust from them. This sequence will remove both dry dirt and dried stains on the table surface. After cleaning them, begin to remove dirt from the legs of the chairs. To do this, place them upside down on a table and clean them from adhering dust.

If there are areas of constant use in bookcases or shelves, then they should also be wiped with a damp cloth. Tiny sebum particles remain on frequently used surfaces and dust particles adhere to them. Dry cleaning does not remove this contamination, so extra care is required. Wet cleaning is also a must-have during a post-renovation cleaning.

Dry Cleaning of Upholstered Furniture

For furniture, you should choose special preparations that clean the fabric well but do not leave stains. This is best done with special devices or vacuum cleaners with a reverse suction program. Thanks to these systems, the main problem – moisture soaked in sofa cushions – would be eliminated.

Use only special cleaning agents!

In order to do a high-quality cleaning of sofas and armchairs, you must have some experience. Different types of fabrics require their own detergents, otherwise, they may become streaked or frayed. Only the use of special attachments and compounds allows you to preserve the color palette of textile upholstery. In this case, the integrity of the surface is not compromised, which prevents the appearance of holes or protruding fibers.

Cleaning can be done manually, but then special brushes are required. Cleaning takes place with great expenditure of effort and time, and due to increased physical stress, upholstered furniture will quickly lose its original appearance. You will also need to figure out a way to prevent water from soaking into the sofa filler. Due to the difficulty of manual cleaning, it is advisable to use it only for general cleaning.

Wet Floor Cleaning

When the room is prepared, and all additional surfaces have already been cleaned, start to remove dirt from the floor. Due to the large areas and the frequency of use, the floor covering is the most greasy. There are a number of surfaces that are easy to remove stains and dirt from – tiles and linoleum. But carpets are often present in homes, and they also need to be cleaned regularly.

If there are no problems with hard surfaces, then certain rules must be followed with carpets.

There are two methods of wet cleaning floors:

using brushes and mops;
using a washing vacuum cleaner.

The latter option is the most preferable because the device has special attachments for different coatings. With their use, even the most difficult stains can be removed easily. It will also allow you to get to hard-to-reach places where the greatest amount of dirt accumulates.

The best way to clean the floors is to use a washing vacuum cleaner!

When using a washing vacuum cleaner, regular routine cleaning of carpet differs from washing floors only with special means. It is important to remember that detergents for fabric and linoleum must differ in active ingredients. For regular cleaning, you need a little product, because you only need to remove only the top layer of dirt. But when there is a stain, or the carpet is heavily soiled, then stronger substances will need to be used.

The stronger the cleaning agent, the faster the carpet fabric will wear out and lose its appearance. To avoid the use of these detergents, it is necessary to carry out a systematic cleaning of the carpet. Then it will look new for a long time.

Rarely Cleaned Surfaces

Depending on the season, it is necessary to remove dirt from a number of surfaces per month. It does not make sense to clean them at every cleaning, so sometimes they are forgotten. In order to prevent this, you should create a reminder for yourself or clear them on odd weeks of the month.

What to Wipe:

inner surfaces of cabinets;
ventilation grilles;
fan blades;
kitchen hood;
doors and ventilation grilles;
battery grilles (or the radiators themselves);
air conditioner grilles;
blinds.

All of these surfaces are designed to trap the least amount of dust, most of which slips off. But neglect of their cleaning leads to the fact that when using devices, a cloud of the smallest particles rises into the air. Because of that, the room gets dirty faster.

Cleaning the Bathroom

Use a special bathroom cleaner!

It is important to remember that the bathroom and toilet are the most common places for mold to grow. Therefore, to prevent harm to health, it is required to clean all surfaces exposed to moisture. Be sure to pay attention to all the planes of the shower and bath. Cleaning tiles on walls, floors, or ceilings are fairly easy if you use special brushes or vacuum cleaner attachments.

In addition to removing fungus and soap stains, limescale is removed from tiles and tile joints. This only happens when using special materials that do not leave traces behind. No matter how long the dirt has accumulated, a professional cleaning can restore the bathroom to its attractive appearance.

In addition to cleaning the tiles, you need to remove soap stains from mirrors and taps. For this, different materials are used. The glass surface is treated with agents containing alcohol, and a liquid with a low acid content is required to clean metal faucets. This will remove limescale from the water from the metal.

Remember, if you want to save time and have a professional deep cleaning, you can always rely on a White Glove Cleaner, just ask for a qoute to know the price for your cleaning service in NYC.

Get a Free Cleaning Quote